HTTP Status Codes

Value	Title	Description
1xx	Informational	Request received, continue processing
100	Continue	This is an interim response that indicates that client should continue the request if it is not already conmpleted.
101	Switching Protocols	This is sent in response to a client upgrade request header to tell the client to which protocol the server is switching.
102	Processing	WebDAV Deprecated: This was used in WebDAV contexts to indicate that the server received the request, but that no status was available yet.
103	Early Hints	This status code is primarily intended to be used with the Link header, letting the user agent start preloading resources while the server prepares a response or preconnect to an origin from which the page will need resources.
2xx	Success	The request was received, understood, and accepted.
200	OK	The request succeeded indicating one the of the following: GET: The resource has been fetched and transmitted in the message body. HEAD: Representation headers are included in the response without any message body. PUT or POST: The resource describing the result of the action is transmitted in the message body. TRACE: The message body contains the request as received by the server.
201	Created	The request succeeded, and a new resource was created as a result. Typically, this is the response sent after POST requests or some PUT requests.
202	Accepted	The request has been received but not yet acted upon. It is noncommittal, since there is no way in HTTP to later send an asynchronous response indicating the outcome of the request. It is intended for cases where another process or server handles the request, or for batch processing.
203	Non-Authoritative Information	This response code means the returned metadata is not exactly the same as is available from the origin server, but is collected from a local or a third-party copy. This is mostly used for mirrors or backups of another resource. Except for that specific case, the 200 OK response is preferred to this status.
204	No Content	There is no content to send for this request, but the headers are useful. The user agent may update its cached headers for this resource with the new ones.
205	Reset Content	Tells the user agent to reset the document which sent this request.
206	Partial Content	This response code is used in response to a range request when the client has requested a part or parts of a resource.
207	Multi-Status	WebDAV: Conveys information about multiple resources, for situations where multiple status codes might be appropriate.
208	Already Reported	WebDAV: Used inside a <dav:propstat> response element to avoid repeatedly enumerating the internal members of multiple bindings to the same collection.
226	IM Used	HTTP Delta encoding: The server has fulfilled a GET request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance.
3xx	Redirection	Further action must be taken to complete the request.
300	Multiple Choices	In agent-driven content negotiation, the request has more than one possible response and the user agent or user should choose one of them. There is no standardized way for clients to automatically choose one of the responses, so this is rarely used.
301	Moved Permanently	The URL of the requested resource has been changed permanently. The new URL is given in the response.
302	Found	This response code means that the URI of requested resource has been changed temporarily. Further changes in the URI might be made in the future, so the same URI should be used by the client in future requests.
303	See Other	The server sent this response to direct the client to get the requested resource at another URI with a GET request.
304	Not Modified	This is used for caching purposes. It tells the client that the response has not been modified, so the client can continue to use the same cached version of the response.
305	Use Proxy	Deprecated Defined in a previous version of the HTTP specification to indicate that a requested response must be accessed by a proxy. It has been deprecated due to security concerns regarding in-band configuration of a proxy.
306	(Unused)	This response code is no longer used; but is reserved. It was used in a previous version of the HTTP/1.1 specification.
307	Temporary Redirect	The server sends this response to direct the client to get the requested resource at another URI with the same method that was used in the prior request. This has the same semantics as the 302 Found response code, with the exception that the user agent must not change the HTTP method used: if a POST was used in the first request, a POST must be used in the redirected request.
308	Permanent Redirect	This means that the resource is now permanently located at another URI, specified by the Location response header. This has the same semantics as the 301 Moved Permanently HTTP response code, with the exception that the user agent must not change the HTTP method used: if a POST was used in the first request, a POST must be used in the second request.
4xx	Client Error	The request has syntax errors and can not be processed.
400	Bad Request	The server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing).
401	Unauthorized	Although the HTTP standard specifies "unauthorized", semantically this response means "unauthenticated". That is, the client must authenticate itself to get the requested response.
402	Payment Required	The initial purpose of this code was for digital payment systems, however this status code is rarely used and no standard convention exists.
403	Forbidden	The client does not have access rights to the content; that is, it is unauthorized, so the server is refusing to give the requested resource. Unlike 401 Unauthorized, the client's identity is known to the server.
404	Not Found	The server cannot find the requested resource. In the browser, this means the URL is not recognized. In an API, this can also mean that the endpoint is valid but the resource itself does not exist. Servers may also send this response instead of 403 Forbidden to hide the existence of a resource from an unauthorized client. This response code is probably the most well known due to its frequent occurrence on the web.
405	Methodd Not Allowed	The request method is known by the server but is not supported by the target resource. For example, an API may not allow DELETE on a resource, or the TRACE method entirely.
406	Not Acceptable	This response is sent when the web server, after performing server-driven content negotiation, doesn't find any content that conforms to the criteria given by the user agent.
407	Proxy Authentication Required	This is similar to 401 Unauthorized but authentication is needed to be done by a proxy.
408	Request Timeout	This response is sent on an idle connection by some servers, even without any previous request by the client. It means that the server would like to shut down this unused connection. This response is used much more since some browsers use HTTP pre-connection mechanisms to speed up browsing. Some servers may shut down a connection without sending this message.
409	Conflict	This response is sent when a request conflicts with the current state of the server. In WebDAV remote web authoring, 409 responses are errors sent to the client so that a user might be able to resolve a conflict and resubmit the request.
410	Gone	This response is sent when the requested content has been permanently deleted from server, with no forwarding address. Clients are expected to remove their caches and links to the resource. The HTTP specification intends this status code to be used for "limited-time, promotional services". APIs should not feel compelled to indicate resources that have been deleted with this status code.
411	Length Required	Server rejected the request because the Content-Length header field is not defined and the server requires it.
412	Precondition Failed	In conditional requests, the client has indicated preconditions in its headers which the server does not meet.
413	Payload Too Large	The request body is larger than limits defined by server. The server might close the connection or return an Retry-After header field.
414	URI Too Large	The URI requested by the client is longer than the server is willing to interpret.
415	Uusupported Media Type	The media format of the requested data is not supported by the server, so the server is rejecting the request.
416	Range Not Satisfiable	The ranges specified by the Range header field in the request cannot be fulfilled. It's possible that the range is outside the size of the target resource's data.
417	Expectation Failed	This response code means the expectation indicated by the Expect request header field cannot be met by the server.
418	I am a teapot	April Fools' Day joke. It indicates the server is a teapot and cannot brew coffee. It is sometimes used as an alternative to other failed requests.
421	Misdirected Request	WebDAV: The request was well-formed but was unable to be followed due to semantic errors.
422	Unprocessable Entity	WebDAV: The resource that is being accessed is locked.
423	Locked	WebDAV: The resource that is being accessed is locked.
424	Failed Dependency	WebDAV: The request failed due to failure of a previous request.
425	Too Early (Experimental)	Indicates that the server is unwilling to risk processing a request that might be replayed.
426	Upgrade Required	The server refuses to perform the request using the current protocol but might be willing to do so after the client upgrades to a different protocol. The server sends an Upgrade header in a 426 response to indicate the required protocol(s).
428	Precondition Required	The origin server requires the request to be conditional. This response is intended to prevent the 'lost update' problem, where a client GETs a resource's state, modifies it and PUTs it back to the server, when meanwhile a third party has modified the state on the server, leading to a conflict.
429	Too Many Requests	The user has sent too many requests in a given amount of time (rate limiting).
431	Request Header Fields Too Large	The server is unwilling to process the request because its header fields are too large. The request may be resubmitted after reducing the size of the request header fields.
451	Unavailable For Legal Reasons	The user agent requested a resource that cannot legally be provided, such as a web page censored by a government.
5xx	Server Error	The server failed to process the request.
500	Internal Server Error	The server has encountered a situation it does not know how to handle. This error is generic, indicating that the server cannot find a more appropriate 5XX status code to respond with.
501	Not Implemented	The request method is not supported by the server and cannot be handled. The only methods that servers are required to support (and therefore that must not return this code) are GET and HEAD.
502	Bad Gateway	This error response means that the server, while working as a gateway to get a response needed to handle the request, got an invalid response.
503	Service Unavailable	The server is not ready to handle the request. Common causes are a server that is down for maintenance or that is overloaded. Note that together with this response, a user-friendly page explaining the problem should be sent. This response should be used for temporary conditions and the Retry-After HTTP header should, if possible, contain the estimated time before the recovery of the service. The webmaster must also take care about the caching-related headers that are sent along with this response, as these temporary condition responses should usually not be cached.
504	Gateway Timeout	This error response is given when the server is acting as a gateway and cannot get a response in time.
505	HTTP Version Not Supported	The HTTP version used in the request is not supported by the server.
506	Variant Also Negotiates	The server has an internal configuration error: during content negotiation, the chosen variant is configured to engage in content negotiation itself, which results in circular references when creating responses.
507	Insufficient Storage	WebDAV: The method could not be performed on the resource because the server is unable to store the representation needed to successfully complete the request.
508	Loop Detected	WebDAV: The server detected an infinite loop while processing the request.
510	Not Extended	The client request declares an HTTP Extension (RFC 2774) that should be used to process the request, but the extension is not supported.
511	Network Authentication Required	Indicates that the client needs to authenticate to gain network access.